Victron Orion-TR Smart Non-Isolated DC-DC Converter - 24 VDC to 24 VDC - 400W -

Name: Victron Orion-TR Smart Non-Isolated DC-DC Converter - 24 VDC to 24 VDC - 400W -
SKU: 100042
Price: 253 USD
Availability: InStock

$253.00

Quantity

Orion-TR Smart Non-Isolated DC-DC Converter - 24 VDC to 24 VDC - 400W - 17AMPThe Orion-Tr Smart DC-DC charger is a professional DC-to-DC adaptive 3-stage charger with built-in Bluetooth.Bluetooth Smart Enabled:<ul><li>Any Bluetooth-enabled smartphone, tablet, or other device can be used to monitor, change settings, and update the charger when new software features become available.</li><li>Instant Readout: The VictronConnect App can display key data, including warnings and alarms, on the device list page without the need to connect to the product. </li></ul>Fully Programmable:<ul><li>Battery charge algorithm (configurable) or fixed output. </li><li>Smart alternator compatibility: engine running detection mechanism. </li></ul>Adaptive 3-Stage Charge Algorithm: Bulk – Absorption – Float:<ul><li>For lead-acid batteries, it is important that during shallow discharges the absorption time is kept short to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery is completely recharged.</li><li>For lithium batteries, the absorption time is fixed (the default is 2 hours).</li><li>Alternatively, a fixed output voltage can be chosen. </li></ul>Remote On/Off:A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two-pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All Models Are Short Circuit Proof and Can Be Paralleled to Increase Output Current:An unlimited number of units can be connected in parallel.High Temperature Protected:The output current will reduce at high ambient temperatures. IP43 Protection:When installed with the screw terminals oriented downward. Screw Terminals:No special tools are needed for installation. Input fuse (not replaceable) Specifications:<ul><li>Input Voltage Range: 20-35 V</li><li>Under Voltage Shut Down: 14 V</li><li>Under Voltage Restart: 15 V</li><li>Nominal Output Voltage: 24.2 V</li><li>Output Voltage Adjust Range: 20-30 V</li><li>Output Voltage Tolerance: +/- 0,2 V</li><li>Output Noise: 2 mV rms</li><li>Cont. Output Current at Nominal Output Voltage and 40 Degrees C: 17 A</li><li>Maximum Output Current (10 S) at Nominal Output Voltage: 25 A</li><li>Short Circuit Output Current: 40A</li><li>Cont. Output Power at 25 Degrees C: 480 W</li><li>Cont. Output Power at 40 Degrees C: 400 W</li><li>Efficiency: 89%</li><li>No Load Input Current (2): < 80 mA </li><li>Standby Current: Less than 1 mA</li><li>Galvanic Isolation: 200 VDC between input, output, and case</li><li>Operating Temperature Range: -20 to +55 Degrees C (derate 3 % per °C above 40 °C)</li><li>Humidity: Max. 95 % non-condensing</li><li>DC Connection: Screw terminals</li><li>Maximum Cable Cross-Section: 16 mm² AWG6</li><li>Weight: 1,6 kg (3.5 lb)</li><li>Dimensions (H x W x D): 130 x 186 x 70 mm (5.1 x 7.3 x 2.8 inch)</li><li>Protection Category: IP43 (electronic components), IP22 (connection area)</li><li>Safety Standards: EN 60950</li><li>Immunity Standards: EN 61000-6-2, EN 61000-6-1, EN 55014-2</li><li>Automotive Directive Standards: ECE R10-5</li></ul>Please contact your dealer for any returns, repairs or support issues related to this product.