Egis Automatic Charging Relay Plus - 160A - 24V

<p><strong>Automatic Charging Relay Plus - 160A - 24V</strong></p><p>This 160A Egis automatic charging relay eliminates dead-start batteries by sharing charging on either of two batteries and isolating batteries when no charge sources are present.</p><p><strong>Applications: </strong></p><ul><li>Supports multiple engines or independent charge systems by incorporating two independent start or engine isolation inputs to allow isolation of charge sources when both are active to maximize charging performance</li><li>Protects Electrical System Cascading Faults with an optional lock-out from closing if one terminal is connected to a battery with a shorted cell</li></ul><p><strong>Features:</strong></p><ul><li>Ultra-low power draw compared to typical ACRs (7-10 mA) vs. the 7610 ACR @ 1.3 mA will not deplete batteries even after extended electrical system downtime.</li><li>Simple and robust installation - integrated sealed plug eliminates corrosion; includes Deutsch/Amphenol DTM connector harness</li><li>Start to assist input option to ensure maximum cranking amps are available by allowing manually connecting batteries via a remote switch</li><li>Bullet-proof construction - sealed unit, stainless steel hardware, and high-temperature materials allow mounting anywhere; Integrated thermal overload shutdown protection</li><li>Additional low-amp output can be used to report device status remotely or drive a secondary relay for charge to a battery bank without a charge source (see examples)</li></ul><p><strong>Specifications:</strong></p><ul><li>Continuous Current Amps: 160</li><li>Voltage Range (VDC): 16 – 36</li><li>Off-State Current Draw (mA): 1.3</li><li>Interrupt Current (Amps): 240</li><li>AC Closing Voltage Range (VDC): 25.8-27.2</li><li>AC Opening Voltage Range (VDC): 24.2-25.6</li></ul><p><strong>Focal Features:</strong></p><p><strong>Top Side Dip Switches</strong></p><p>Accessible after mounting for programming voltage settings and determining active features. Protected by self-retained cover.</p><p><strong>Stainless Steel Self-Locking Hardware</strong></p><p>100% non-ferrous corrosion-resistant materials. All attachment screws and nuts are self-locking.</p><p><strong>Integral I/O Connector</strong></p><p>Sealed Molex MX-150 connector eliminates the susceptibility to corrosion and vibrating loose of 1/4" quick connect terminals on competitive products.</p><p><strong>Connection Options</strong></p><p>Comes standard with a Deutsch DT/AT style connector harness. Provides three connection options (MX-150, DT/AT, and wire leads). </p><p><strong>Easy Integration with RT Fuse Blocks (24 HR Circuits)</strong></p><p>Optional EasyLink bus bars reduce the space and cost of connecting TH Series relays with RT Series fuse blocks. </p><p><strong>LED Diagnostics</strong></p><p>Indicates pending relay ON/OFF, under voltage, over voltage/temp, start isolation/assist, and output on/off status.</p><p><img src="https://productimageserver.com/prop65/6pt.png" alt="Warning" /><strong>WARNING:</strong> This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to <a href="http://P65Warnings.ca.gov">P65Warnings.ca.gov</a>.</p> <!--- cis2:mm5sl5hm --->